View MURS260T3_1151490.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MURS260T3
Preferred Device
Surface Mount Ultrafast Power Rectifiers
Ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface mount applications where compact size and weight are critical to the system.
Features http://onsemi.com
* * * * *
Pb-Free Package is Available Small Compact Surface Mountable Package with J-Bend Leads Rectangular Package for Automated Handling High Temperature Glass Passivated Junction Low Forward Voltage Drop (1.20 Volts Max @ 2.0 A, TJ = 150C)
ULTRAFAST RECTIFIERS 2 AMPERES 600 VOLTS
Mechanical Characteristics
* Case: Epoxy, Molded * Weight: 95 mg (approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * *
Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260C Max. for 10 Seconds Polarity: Polarity Band Indicates Cathode Lead
SMB CASE 403A
MARKING DIAGRAM
MAXIMUM RATINGS
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current Non-Repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) Operating Junction Temperature Symbol VRRM VRWM VR IF(AV) IFSM Value 600 Unit V U2J
2.0 @ TL = 125C 35
A A
U2J= Device Code
TJ
*65 to +175
C
ORDERING INFORMATION
Device MURS260T3 MURS260T3G Package SMB SMB (Pb-Free) Shipping 2500/Tape & Reel 2500/Tape & Reel
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
Preferred devices are recommended choices for future use and best overall value.
(c) Semiconductor Components Industries, LLC, 2004
1
October, 2004 - Rev. 2
Publication Order Number: MURS260T3/D
MURS260T3
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, Junction-to-Lead (TL = 25C) Symbol RqJL Value 13 Unit C/W
ELECTRICAL CHARACTERISTICS
Characteristic Maximum Instantaneous Forward Voltage (Note 1) (iF = 2.0 A, TJ = 25C) (iF = 2.0 A, TJ = 150C) Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TJ = 25C) (Rated DC Voltage, TJ = 150C) Maximum Reverse Recovery Time (iF = 1.0 A, di/dt = 50 A/ms) (iF = 0.5 A, iR = 1.0 A, IR to 0.25 A) Maximum Forward Recovery Time (iF = 1.0 A, di/dt = 100 A/ms, Rec. to 1.0 V) 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%. 10 7.0 5.0 175C 100C 3.0 TC = 25C 2.0 I , INSTANTANEOUS FORWARD CURRENT (AMPS) F IF , INSTANTANEOUS FORWARD CURRENT ( m A) 2.0 3.0 TC = 25C 10 7.0 5.0 TC = 175C TC = 100C Symbol vF 1.45 1.20 iR 5.0 150 trr 75 50 tfr 50 ns ns mA Value Unit V
1.0 0.7 0.5
1.0 0.7 0.5
0.3 0.2
0.3 0.2
0.1 0.07 0.05
0.1 0.07 0.05
0.03 0.02
0.03 0.02
0.01 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 VF, INSTANTANEOUS VOLTAGE (VOLTS)
0.01 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 VF, INSTANTANEOUS VOLTAGE (VOLTS)
Figure 1. Typical Forward Voltage
Figure 2. Maximum Forward Voltage
http://onsemi.com
2
MURS260T3
100 TJ = 175C IR, REVERSE CURRENT (m A) 10 IR, REVERSE CURRENT (m A) 10 TJ = 100C 1.0 TJ = 25C 0.1 100 TJ = 175C
1.0
TJ = 100C
0.1
TJ = 25C
0.01 0 100 200 300 400 500 600 700 VR, REVERSE VOLTAGE (VOLTS)
0.01 0 100 200 300 400 500 600 700 VR, REVERSE VOLTAGE (VOLTS)
Figure 3. Typical Reverse Current*
* The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if applied VR is sufficiently below rated VR. 25 NOTE: TYPICAL CAPACITANCE AT 0 V = 24 pF
Figure 4. Maximum Reverse Current
IF(AV) , AVERAGE FORWARD CURRENT (AMPS)
10 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 0 20 40 60 80 100 120 140 160 180 200 TC, CASE TEMPERATURE (C) SQUARE WAVE DC RATED VOLTAGE APPLIED RqJL = 13C/W TJ = 175C
20 C, CAPACITANCE (pF)
15
10
5.0 0 0 4.0 8.0 12 16 20 24 28 32 36 40 VR, REVERSE VOLTAGE (VOLTS)
Figure 5. Typical Capacitance
Figure 6. Current Derating, Case
PF(AV) , AVERAGE POWER DISSIPATION (WATTS)
5.0 SQUARE WAVE
4.0
3.0 TJ = 175C 2.0
DC
1.0 0 0 0.5 1.0 1.5 2.0 2.5 IF(AV), AVERAGE FORWARD CURRENT (AMPS)
Figure 7. Power Dissipation
http://onsemi.com
3
MURS260T3
PACKAGE DIMENSIONS
SMB DO-214AA CASE 403A-03 ISSUE D
S A
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. D DIMENSION SHALL BE MEASURED WITHIN DIMENSION P. INCHES DIM MIN MAX A 0.160 0.180 B 0.130 0.150 C 0.075 0.095 D 0.077 0.083 H 0.0020 0.0060 J 0.006 0.012 K 0.030 0.050 P 0.020 REF S 0.205 0.220 MILLIMETERS MIN MAX 4.06 4.57 3.30 3.81 1.90 2.41 1.96 2.11 0.051 0.152 0.15 0.30 0.76 1.27 0.51 REF 5.21 5.59
D
B
C
K
P
J
H
SOLDERING FOOTPRINT*
2.261 0.089
2.743 0.108
2.159 0.085
SCALE 8:1 mm inches
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082-1312 USA Phone: 480-829-7710 or 800-344-3860 Toll Free USA/Canada Fax: 480-829-7709 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative.
http://onsemi.com
4
MURS260T3/D

▲Up To Search▲

Price & Availability of MURS260T3

	To Download MURS260T3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .